You have probably already done the necessary calculations to determine how much space and how much productivity your business will save as a result of installing a horizontal carousel, vertical carousel, or vertical lift module (VLM). If you haven't done so already, you should get on that right away. You ought to get started on that right away if you haven't already done so if you haven't already.
Should I purchase a new or used vertical carousel or a vertical carousel storage system that is currently on the market? This is a very good question in which to express interest. Before settling on a choice regarding the acquisition of a used vertical carousel, also known as a VLM, the following is a rundown of some of the factors that should be taken into consideration. After all, a reliable re-seller can be discovered almost anywhere, and the cost of a used machine can be as low as half of what it would be for a brand new one in some cases. However, before you make a choice, here is a check list of things for you to consider before you buy something:
It is possible that a used vertical lift machine storage system storage system that is currently available for purchase or a VLM will be sufficient for usage that ranges from light to moderate and occurs across a couple of shifts. If this is the case, then the storage capacity required will be minimal.
Instead, talk to the vendor about the various operational conditions, the maintenance procedures, and the different ways the product can be used. The following are some of the reasons that come to mind:When purchasing a used item, you not only need to have a higher tolerance for risk, but also a significant amount of research under your belt.
A machine that has been run at or above the rated duty cycle of its motors and/or at the upper limits of its maximum load capacity will have more worn components than a machine that has been used lightly. This is because a machine that has been run at or above the rated duty cycle of its motors and/or at the upper limits of its maximum load capacity is designedThis is due to the fact that a device that has been operated at a duty cycle that is at or above the rated level of its motors and/or at the upper limits of its maximum load capacity is not designed to function properly.
If you have the opportunity, inquire about the type of facility that the pre-owned machine was used in, in addition to the location of the facility. Make a request to obtain a copy of all of the service records that are associated with you by putting in your request. When a machine is used in conditions that are particularly harsh, such as high temperatures, the component wear may be accelerated. This can happen because of the harsh conditions. If you have the opportunity, inquire about the type of facility that the pre-owned machine was used in, in addition to the location of the facility.
Check to see if the Original Documentation Can Still Be Used Today.
When purchasing a used machine, there is a chance that this will not be the case. You can use it to get in touch with the product's manufacturer and inquire about information such as the date the product was first manufactured and installed, as well as a record of the service it has received in the past. The most accurate way to determine the quality of a used machine is to have it inspected by a third party that is not affiliated with the seller.
Conduct research into the configuration of the vertical storage carousels that is being used at the moment.
If you buy brand-new machinery, you will have the reassurance of knowing that it will be put together and arranged in accordance with the requirements you provide when you make your purchase. When you buy a used machine, you are responsible for adhering to the machine's dimensions, spacing, and sub-dividing, in addition to the load capacity restrictions that were imposed by the machine's previous owner. If you need to replace each and every bin in the system in order to maintain your inventory, the cost savings you would receive from purchasing used equipment might not be worth it.
Be sure to compare the machine's dimensions and those of its individual components, as well as the electrical requirements of the components, to those of the access doors and the power supply in your facility to see if they are compatible with one another. It is possible that other people will require a voltage that your structure is unable to support; this is something that you should prepare for. It is possible that older models do not comply with the most recent ergonomics regulations, or that they do not have the same level of safety features as more recent models. Both of these scenarios are possible.
Determine which company will be in charge of offering support and service to customers after the sale has been completed.
The majority of the time, the wholesaler or the manufacturer of the new piece of machinery will provide the buyer with the option to purchase an all-inclusive maintenance and repair plan in conjunction with the acquisition of the new piece of machinery. This option will be presented to the buyer at the time of purchase of the new piece of machinery.
When you purchase a used vertical carousel storage system storage system or a VLM, the availability of support from the product's initial manufacturer is not something that can be guaranteed. A reseller may also offer you a service package or point you in the direction of a third party to assist you with the installation, technical support, programming, training, and ongoing maintenance of the product.
Make it a point to inquire about the availability of replacement components as well.
Check to See That the Used Vertical Carousels You Purchase Can Be Integrated Into the System You Already Have in Place in Your Warehouse
It is possible that a used machine will be incapable of communicating with the many different technologies that are located on-site. At the very least, a significant amount of technical expertise is going to be needed in order to get it to function the way it should. Consider working with a systems integrator to determine whether or not a pre-owned piece of machinery is suitable for use with the new technology. Hardware and software that are at the technological forefront of development can be found in the most up-to-date carousels and VLMs. It is possible that a used machine will not be able to meet the requirements of your organization if it is similarly equipped.