Like the multi-purpose furnace, the main purpose of the mesh belt furnace is to remove moisture in the furnace, ensure the life of the furnace, and establish a stable carbon potential. Defects and Improvements of Vacuum Furnaces Compared with the multi-purpose furnace, the mesh belt furnace has a relatively long furnace, and the moisture is not easy to discharge, so the oven time is slightly longer than the multi-purpose furnace, and the oven temperature also changes slightly.Precautions for daily use of vacuum furnaces During the whole baking process, the stirring fans in each zone on the top of the furnace are always in operation, and the cooling water is kept connected. It is necessary to open each drip port, peep hole, and sample hole on the furnace top, otherwise the accumulated water vapor will affect the oven and pre-seepage effect. Z50 SERIES PILLAR TYPE VERTICAL DRILLING MACHINE During the drying process, the mesh belt must be kept running at a low speed (40-60mm/min), and the operation of the mesh belt must be observed every 2 hours. If there is any deviation, it must be adjusted in time.NEW Z50 PILLAR TYPE VERTICAL DRILLING MACHINE WITH TABLE
top of page
bottom of page
ty